product description features mwdmgcl series min typical max unit pass channel wavelength range 1 type 7064 1570 1610 nm type 6470 1500 1564 nm refection channel wavelength range 2 type 7064 1500 1564 nm type 6470 1570 1610 nm insertion loss * pass channel @ 1 refect channel @ 2 0.7 0.5 db isolation refect channel @ 1 pass channel @ 2 12 25 db passband ripple 0.30 db directivity 50 db return loss 50 db polarization dependent loss 0.1 db polarization mode dispersion 0.05 ps maximum power handling 500 mw fiber type corning smf-28 operating temperature 0 to +70 c storage temperature -40 to +85 c package dimensions ** 250 m bare fiber 900 m loose tube p1: (?) 5.5 x (l) 34.0 p2: (?) 5.5 x (l) 40.0 mm applications performance specification ns note: * values are referenced without connector loss. ** the mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom speci- fed. *** the maximum il is under all states of polarization and within the full operating temperature and wavelength ranges specifed. s0031 - r03.20100330 green c band/l band micro-optic wdm mwdmgcl series oplinks micro-optic wavelength division multiplexer (mwdm) is based on thin-flm flter technology and patented athermal platform for optical device. the mwdm 6470/7064 is used to combine (or separate) conventional band (1530 - 1560 nm) with (or from) the longer wavelength band (1574 - 1610 nm) signals. is device has very fat and wide passband, low insertion loss, and high isolation mak - ing this the ideal device for high-power optical amplifcation systems and dwdm network applications. the mwdm is used in high-power applications in dwdm systems. oplink mwdm devices are bellcore gr-1221 qualifcation tested and complied with industry green initiatives such as rohs and weee. all oplink prod - ucts are epoxy-free in the optical path. ? environmental green plan compliance ? wide operating wavelength range ? low insertion loss ? high channel isolation ? ultra flat wide passband ? highly stable & reliable ? epoxy-free optical path ? fiberoptic amplifers ? system monitoring ? fiberoptic instruments ? laboratory r&d
46335 landing pkwy fremont, ca 94538 tel: (510) 933-7200 fax: (510) 933-7300 email: sales@oplink.com ? www.oplink.com mwdmg ordering information product lines: ? mux/demux ? switching/routing ? coupling/splitting ? monitoring/conditioning ? amplifcation ? transmission ? interconnect ? rgb laser modules mechanical drawing / package dimensions (dimension in mm) p1: 250 m bare fber p2: 900 m loose tube oplink can provide a remarkable range of customized optical solutions. for detail, please contact oplinks oem design team or account manager for your requirements and ordering information (510) 933-7200. 0 0 package & fiber jacket p1 + 250 m bare fber = 11 p2 + 900 m loose tube = 22 wavelength fiber length* 1564 nm pass/1570 nm ref = 6470 1570 nm pass/1564 nm ref = 7064 0.5 meter = h 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 connector type none = 1 fc/pc = 2 fc/spc = 3 fc/apc = 4 sc/pc = 5 sc/spc = 6 sc/apc = 7 st = 8 lc = 9 mu = a green c band/l band micro-optic wdm mwdmgcl series s0031 - r03.20100330 * the tolerance of fber length is +/-0.1m. 1 meter is standard. the lead-time for special fber length will be longer.
|